|Entity Type||Feature Class|
|Summary||land use designations as they are mapped in the adopted plans|
Status: COMPLETED 2010. The data was converted from the most recent (2010) versions of the adopted plans, which can be found at http://cms3.tucsonaz.gov/planning/plans/
Contact: John Beall, City of Tucson Development Services, 520-791-5550, John.Beall@tucsonaz.gov. Jamie Brown, City of Tucson, 520-837-6934. Jamie.Brown@tucsonaz.gov
Intended Use: For mapping
Supplemental Information: In March 2010, Pima Association of Governments (PAG), in cooperation with the City of Tucson (City), initiated the Planned Land Use Data Conversion Project. This 9-month effort involved evaluating mapped land use designations and selected spatially explicit policies for nearly 50 of the City's adopted neighborhood, area, and subregional plans and converting the information into a Geographic Information System (GIS) format. Further documentation for this file can be obtained from the City of Tucson Planning and Development Services Department or Pima Association of Governments Technical Services. A brief summary report was provided, as requested, to the City of Tucson which highlights some of the key issues found during the conversion process (e.g., lack of mapping and terminology consistency among plans). The feature class "Plan_boundaries" represents the boundaries of the adopted plans. The feature class "Plan_mapped_land_use" represents the land use designations as they are mapped in the adopted plans. Some information was gathered that is implicit based on the land use designation or zones (see field descriptions below). Since this information is not explicitly stated in the plans, it should only be viewed by City staff for general planning purposes. The feature class "Plan_selected_policies" represents the spatially explicit policies that were fairly straightforward to map. Since these policies are not represented in adopted maps, this feature class should only be viewed by City staff for general planning purposes only.
2010 - created by Jamison Brown, working as an independent contractor for Pima Association of Governments, created this file in 2010 by digitizing boundaries as depicted (i.e. for the mapped land use) or described in the plans (i.e. for the narrative policies). In most cases, this involved tracing based on parcel (paregion) or street center line (stnetall) feature classes. Snapping was used to provide line coincidence. For some map conversions, freehand sketches were drawn to mimick the freehand sketches in the adopted plan.
Field descriptions for the "Plan_mapped_land_use" feature class: Plan_Name: Plan name Plan_Type: Plan type (e.g., Neighborhood Plan) Plan_Num: Plan number LU_DES: Land use designation (e.g., Low density residential) LISTED_ALLOWABLE_ZONES: Allowable zones as listed in the Plan LISTED_RAC_MIN: Minimum residences per acre (if applicable), as listed in the Plan LISTED_RAC_TARGET: Target residences per acre (if applicable), as listed in the Plan LISTED_RAC_MAX: Maximum residences per acre (if applicable), as listed in the Plan LISTED_FAR_MIN: Minimum Floor Area Ratio (if applicable), as listed in the Plan LISTED_FAR_TARGET: Target Floor Area Ratio (if applicable), as listed in the Plan LISTED_FAR_MAX: Maximum Floor Area Ratio (if applicable), as listed in the Plan BUILDING_HEIGHT_MAX Building height maximum (ft.) if determined by Plan policy IMPORTANT: A disclaimer about the data as it is unofficial. URL: Uniform Resource Locator IMPLIED_ALLOWABLE_ZONES: Implied (not listed in the Plan) allowable zones IMPLIED_RAC_MIN: Implied (not listed in the Plan) minimum residences per acre (if applicable) IMPLIED_RAC_TARGET: Implied (not listed in the Plan) target residences per acre (if applicable) IMPLIED_RAC_MAX: Implied (not listed in the Plan) maximum residences per acre (if applicable) IMPLIED_FAR_MIN: Implied (not listed in the Plan) minimum Floor Area Ratio (if applicable) IMPLIED_FAR_TARGET: Implied (not listed in the Plan) target Floor Area Ratio (if applicable) IMPLIED_FAR_MAX: Implied (not listed in the Plan) maximum Floor Area Ratio (if applicable) IMPLIED_LU_CATEGORY: Implied (not listed in the Plan) general land use category. General categories used include residential, office, commercial, industrial, and other.
|Credit||Published by City of Tucson Information Technology Department, GIS Services|
Prior to use, contact John Beall, City of Tucson Development Services, 520-791-5550, John.Beall@tucsonaz.gov
|Metadata Last Updated||2022-06-22|
|West Extent: 968978.062664||
North Extent: 481575.375000
South Extent: 377820.656168
|East Extent: 1075082.250000|